THIS BLOG HAS MOVED!
for the time being i will keep my old posts here at blogger, but i have imported all content to wordpress. please don't abandon me! to stay updated, head on over to my new space and follow me there. thanks!
—lisa g.
[UPDATE: easier than i thought! here's my new address... come check it out and update your readers!!!]
okay folks... today. today! i am moving over to wordpress, with or without a glass of wine in hand. it seems pretty easy to do, wish me luck! my blog address will be the same, just wordpress instead of blogger. so, if i stop showing up in your feed you'll know where to find me.
i have a slight lull in my sewing due to the fact that our heater went out over the past weekend and we've been heating our not so well insulated house with a few space heaters. now, my sewing room never had central heat (it's a weird poorly built addition to the house) so i've always had a space heater to keep it warm. but due to the lack-of-heat situation i have to sacrificed my sewing room heat in order to keep our actual living space warm-ish. it was okay over the last few days when our temps made it to 50s F, but today we're hovering in the 30s F and my hands are shivering... it may not be fixed until next week due to the freak snowstorm we had last week, dumping us with another 2 feet of snow. seriously. can we just get on to spring already? we are told that all those heater fixing people with the gas company are working in high priority regions where there was flooding and coastal erosion and such. what do i know? i just want heat!
while my sewing room is a literal icebox i have started prep work on the grainline studio archer button up. woot! i printed and taped last night, traced this morning and hope to cut my fabric today or tomorrow. that is if my hands are steady enough. this was probably the most it really needs to be precise .pdf pattern i've done. initially i had a bit of a problem, it seems as though my printer cuts off the top and bottom of each pattern page leaving me to guess exactly how to connect those sides of the page. i came up with a brilliant (if i do say so) solution.
since the sides of each page printed fine, i simply traced the the square that connects each page to the next, then used it as a guide to line up the edges that didn't print. whew!
alright folks... see you on the other side!
—lisa g.
so i made a green corduroy skirt eons ago and never really liked it all that much. (i hesitate to link to it, but here you go) i think i wore it once, altered it a bit, then chucked it into the closet never to be seen again. until recently... i unearthed it from the bottom of a pile of sweaters and thought maybe i should do something with it. there was a decent amount of fabric and the moss mini from grainline studio came to mind. i bought the pattern and lo and behold, it just fit! the original skirt had buttons down the front so i decided to keep them and not mess with a zipper.
i didn't bother to muslin this, i figured if it didn't fit i can call this my muslin and still be okay with that. happily it does fit well enough to be worn. yay! i measured a size 8 so that's what i cut. it still seems a little snug in the hips, but it is a mini skirt, so i think it's okay. the waist was a little gaping in the back so i took in the back yoke by a small amount to curve around le boo-tay.
as you all know, this skirt lives up to it's name as a mini skirt. i cut the skirt to the longest length then made a faced hem with bias tape i reclaimed from the original skirt. also—polka dot pocket lining!
the only other fitting tweak i need to work out is that space below the waist but above my hips. i'm not sure if i have proportionally low hips or what, but that area above the pocket is just kind of floating out there. i've had this problem before, so i guess i need to pay more attention to it. since i was using an existing button down skirt i couldn't sew the pocket lining into the fly as the pattern instructs and i think that would have helped to pull that part in closer to the body. no worries, there will be a next time with this pattern.
i had to piece the waistband because it was a hair too short... we'll just call it a design feature. oh, and i added back pockets and belt loops because i thought it needed them.
fortunately the small fit issues i have don't render the skirt useless. i had some purple cotton lycra knit so i decided to make cation designs dolman tee. i've seen these pop up over the past months and while i liked it, i wasn't sure if it was the right style for my figure. i always feel like my shoulders stick out funny and the lack of shoulder seam can exaggerate it. however, i am happy to say i think this top is not only supremely comfortable, but also flattering!
when i printed the pattern the scale was off (i got 3.5" for the 4" square) so i took an existing knit tee pattern and picked my size based off that. it all worked out and i think this is my new favorite tee! it was wicked fast to sew and would have been even faster to cut, however i had less than a yard of fabric so i had to do some fancy maneuvering. i cut the hem band in two pieces and had to cut the sleeve bands with the grain. i had plenty of stretch going both directions so it worked out fine. also i did a neck binding instead of band. i like the wide neck slouchy look for this.
so look at that, a whole outfit in one weekend! both projects were super fast and i love how they go together. can't wait to try more grainline patterns, i just bought fabric for an archer blouse. so excited for that one!!!
—lisa g.
